- Press Del while the PRESS DEL
TO ENTER SETUP message is displayed to access the BIOS setup
utility.
ASUS - p5b, a7v600, a7v8x, a8n, a8v, k8v, m2n, p5k, p5n, etc.
- Press Del right after starting
the computer to enter BIOS. A few ASUS motherboards use Ins
instead.
- Press Del when the ...enter
setup message briefly displays at the bottom of the screen after
powering on the computer.
- Press the Del key while the full
screen logo is showing on screen, immediately after starting the
computer.
- Press the Del key when the Press
DEL to enter setup message appears, immediately after the memory
test.
- Press either the Del or F1
key to enter the BIOS Setup Utility.
- Enter BIOS by pressing Del
immediately after powering on the computer.
- Press Del to enter the BIOS
Setup Utility.
- Press Del
during POST, right after the computer is turned on.
- Press F2 during the initial boot
process to enter the BIOS setup utility.
- Enter BIOS setup by powering on the
computer and pressing Del immediately.
- Press Del after the boot process
begins to enter the BIOS configuration utility.
- Press Del while the Press DEL
to enter SETUP message displays on screen after powering on the
computer.
- Press Del or F1 to enter
the BIOS utility.
- Press Del after powering on to
get into BIOS.
- Press Del or Ctrl+Alt+Esc
at the Press DEL to enter SETUP message that appears right
after turning on the computer.
- Press the Del key at any time
during the boot process.
- After starting the system, press the
Del or F4 key to start the BIOS setup utility.
- Press Del during the boot process, immediately after the computer is turned on.
- Press Del or F2 immediately after powering on.
- The BIOS on the Acer Altos 600 server uses the Ctrl+Alt+Esc key and the F1 key for advanced options.
- Older Acer computers may use also use
the F1 or Ctrl+Alt+Esc keys to access BIOS.
- Press F10 while the cursor in the top right corner of the screen is blinking.
- Older Compaq computers may use the F1,
F2, F10, or Del key to give access to BIOS.
- Press F2 when the Dell logo appears. Press every few seconds until the message Entering Setup appears.
- Older Dell desktops and laptops may instead use Ctrl+Alt+Enter or Del to enter BIOS.
- Older Dell laptops may use Fn+Esc
or Fn+F1.
- Press Tab or Del while the eMachine logo displays on screen.
- Other eMachine computers may use F2
to enter BIOS.
- Press F2 once the Fujitsu logo
appears.
- Press the F1 key repeatedly after restarting the computer.
- Some older Gateway computers use F2
to access the BIOS Setup utility.
- Press the F1, F10, or F11 key after restarting the computer.
- HP Tablet PCs may use F10 or F12.
- Other HP computers may allow access to
BIOS using the F2 or Esc keys.
- Press F1 immediately after powering on the computer.
- Older IBM computers (including some
laptops) may utilize the F2 key for BIOS entry.
- Press F1 or F2 after powering on the computer.
- Older Lenovo products allow access to
BIOS using Ctrl+Alt+F3, Ctrl+Alt+Ins, or Fn+F1.
- Press F1, F2 or Del
immediately after powering on the PC.
- Press F2 to enter the BIOS
Setup.
- Press F1, F2, or Del
to enter BIOS.
- Press F2 after the computer starts.
- Some very old Sharp PCs require a Setup
Diagnostics Disk to access BIOS.
- Press F2 or Del on
startup.
- Press F1, F2 or F3
after turning on the computer.
- Press F1 or Esc after powering on to access BIOS.
- Press F12 on a Toshiba Equium.
ARI / ALR / AST (Advantage) - Press the Ctrl+Alt+Esc or Ctrl+Alt+Del keys.
Cybermax - Press the Esc key.
Tandon - Press the Ctrl+Shift+Esc keys.